Hello peoplel,
I have the following mistake:
I don´t found the FIX_NW702.UPG .
Please let me know your comments.
Thanks.
↧
Upgrade SAP R/3 4.7 200 to ECC 6.5
↧
Enhancement Packages for Upgrade Ecc6.0
Dear All
We are running SAP ECC 6.0 .. was have alot of Z T-code in PS module .. so far we did not upgrade our system with nay enhancement package as we are afraid that the implementation of enhancement package would affect the Z T-codes created heavily in PS module.
How can we know that all SAP standard program are not modified by PS consultant ?
Regards
Mahmoud EL Nady
↧
↧
Need export tool for ECC EHP3
Hello experts ,
I urgently need the export tool for SAP ECC EHP3 which is based on NW7.0 and is basically ERP6 SR3
But I could not get any tool for exporting this abap stack.
I already tried SWPM but there is no option for business suite 2005.
Please assist.
Regards,
↧
SPAU/SPDD and SUM
We are using SUM to do the upgrade.
In the SUM tool, you have to specify the transports that hold the results after executing SPDD and SPAU.
Then SUM will automatically use this transports during the upgrade of the target system.
The original SPDD/SPAU transport is still on the development system, hanging there.
Also it is hard to see if the content of the SPDD/SPAU has been imported.
The SUM logging shows some info, so it is different from the other/normal transports with import logging.
What is the procedure for these transports that hold stuff from SPDD/SPAU?
- remove transport?
- just remove transport from import queue and leave it there?
- still move it over across the landscape to production?
- just leave it?
↧
How to start upgradation of BODS
Dear Mentors,
Can you please tell How to start upgrade setup for BODS in Linux
Regards
S.Basis
↧
↧
Upgrade 46C system to ERP 6.0 EHP6 (Oracle/Windows) including Unicode conversion
Dear Friends,
We are going to upgrade a 46C NUC system to ERP 6.0 EHP6 or EHP8 (running on Oracle 10g & Windows 2003).
We will need also to combine the upgrade with an Unicode conversion.
Target system will be a SAP ERP 6.0 EHP 6 or 8 Unicode system running on Windows 2008 R2 with Oracle 12C.
We are going first to create a sandbox system using a copy of our production system to determine the upgrade/migration path and to estimate workload and complexity.
Regarding this test, I have a question:
- Because it's a sandbox and developers are busy on other projects, we don't want to adapt ABAP Programs to comply with Unicode restrictions. Do you think that we will be able to continue the migration process and to upgrade system to target release?
If you have information / documents to share, please don't hesitate (zobair.lamarti@gmail.com).
Thank you for your help.
Best regards,
Zobair
↧
Phase ACT_UPG
Hello,
We have a problem with phase ACT_UPG. I attached screenshot with the error and log ACTUPG.ELLG
Please letme Known your comments .
Regards
↧
BW upgrade error -- How to delete RPload table content from OS level.
Hi Experts,
We are currently doing BW upgrade to BW 7.31. Got some error SMSSY2. we raised SAP oss message for that. SAP suggested to delete contents of the table RPLOAD. how delete it from OS levle.
OS - Windows
DB- SQL
regards
Manjappa
↧
SAP Netweaver PI installation methods
Hai Guru's
What is the difference between Separate Releases of Process Integration of SAP Netweaver PI 7.4 and SAP Netweaver PI 7.1 Including Enhancement Package 1 ?
Can any one share the installation files or links for SAP Netweaver Process Integration 7.1 ?
↧
↧
MAIN_SHDIMP/PARMVNT_SHD 288-cannot use duplicate table name
Hello all,
I am encountering below issue on MAIN_SHDIMP/PARMVNT_SHD of my upgrade. Below is the log:
2WETP000 10:06:29: Retcode 1024: error in DDL statement for "CECOEP " - repe
2WETP000 at
2EETP345 10:06:41: Retcode 1024: SQL-error "288-cannot use duplicate table name: CECOEP: line 1 col
2EETP345 21 (at pos 20)" in DDL statement for "CECOEP "
2 ETP000 --------------- DB-ROLLBACK() ---------------
2EETP334 10:06:41: error in DDL, nametab for "CECOEP" not activated
2 ETP301 ----------------------------------------------------------------------
3 ETP361 "0" Shadow-Nametabs activated, DDL executed
2 ETP362 "2" Shadow-Nametab activations failed
2 ETP360 Begin: Act. of Shadow-Nametabs with DDL ("2015/10/22 10:06:17")
2 ETP363 End : Act. of Shadow-Nametabs with DDL ("2015/10/22 10:06:41")
2 ETP301 ----------------------------------------------------------------------
1 ETP180 UNKNOWN ACTION
1 ETP110 end date and time : "20151022100641"
1 ETP111 exit code : "8"
1 ETP199 ######################################
Please help advice how to solve this. Thank you very much!
↧
RFC between SAP Business Object BI 4.0 and ECC 6.0 ERP
Dear sir ,
Request you to advice , how to create RFC between SAP Business Object BI 4.0 and ECC 6.0 ERP .
Regards
S.palani selvan
↧
Post upgrade: DDL views could not be generated
ERP 6.0 EHP 7 stack 8 to 9 Upgrade and SFIN install has been completed but got the below message upon completion.
LONGPOST.LOG contains DDL Sources that cannot be activated.
What is the next step for this? Thanks a lot in advance!
↧
SAP-LSO- WBT course temp issue
Hi Experts,
We have an upgrade issue with SAP-LSO. If we save any WBT course type with qualification, it is saving with the name "TEMP".
If we don't give any qualification to course type, then it is saving with the name what we give..
Please advise..
↧
↧
sap homogeneous system copy
Dear All,
Is there any document for sap homogeneous system copy with sap os/db. Please share or any txt.
regards,
Raj
↧
spdd shows OSS Notes in the object list during ACT_UPG spdd
Hi gurus, During the upgrade from EHP4 to EHP7, in the ACT_UPG phase, the spdd screen usually shows only a few data dictionary objects to be adjusted. During this upgrade, spdd lists OSS notes. When trying to process them, spdd prompts us to download prerequisite OSS notes, but notes cannot be downloaded during an upgrade. Message "Internal Error: Upgrade is running! component information is not valid" is received if we try to download an OSS note in the middle of an upgrade. In previous upgrades, I have not seen OSS notes in the spdd list. Any advice?
Warm Regards, CM
↧
Oracle_Session_Max_status_SID
Hi,
I am receiving below error alert for Solution Manager 7.1 Production.
Oracle_Session_Max_status_SID
Select limit_value current_utilization from v$resource_limit where resource name='sessions':92
Kindly advise
Thanks & Regards
Rao
↧
EHP7, from Finance And Controlling Module
Hello Friends - Our system is getting upgrade to EHP7 from EHP5 and I'm part of Testing team.
1. Can you please let me know the changes you see in EHP7,FICO, from user perspective.
2. On which areas, we will have to perform more testing?
3. How to find out the critical areas to pay more attention during attention?
Can you please provide me the information I requested, though it is basic thing to most of you.
Thanks
↧
↧
ASE Error SQL175 - During SPAM update, IMPORT PROPER phase
| Short Text | |||
| [ASE Error SQL175] During SPAM update, IMPORT PROPER phase | |||
| Msg Error: Functions may only be nested to level | |||
Dear all,
I'm updating SP stack on a SAP ERP 6.0 EhP7 system, running on SAP ASE
Package ID Comp.-ID Release Short Description
SAPKH61707 SAP_APPL 617 SAP_APPL 617: SP 0007
Looking into SAP syslog, I've found the error messages below. I'd found
The messages below are also mentioned in SAP Notes 2197922 and 2162596
The ABAP changes for SAP Note 2201556 were applied manually into
During error resolution I'd upgrade also the SAP Kernel patch level and
Thanks in advance,
Error messages at syslog
C DbSlExecute - Error 99 (dbcode 175) on DDLExecute | |||
↧
Test Logon to SAP Ides ECC 6.0 on windows 2008 server failed during installation, Syntax error in Program SAPMSSY30.
We are installing SAP Ides ECC 6.0 with oracle database on windows 2008 server.
The installation is failing on the "Check DDIC Password" phase with the following message.
" Test logon to SAP System "sid" failed.
SOLUTION : Make sure that the system is started,that the user DDIC exists and that the password of user DDIC is correct
"
We have verified the password is correct and the system is indeed up.
We however cannot logon to the system SAPGUI issue the following message :
"SAP System Message:
Syntax error in Program SAPMSSY30 "
We have tried to redo the installation several times but still experience the same error.All prerequisites activities have been performed on the source system.We have tried upgrading the kernel too but to no effect.
Your assistance would be greatly appreciated .
Regards
Amit Mishra
↧
Upgrade SAP R/3 ENTERPRISE 47X200 to ERP 6.0 EHP8
Dear Friends,
We are going to upgrade a SAP R/3 ENTERPRISE 47X200 Unicode system (Kernel 6.40_EX2 64-BIT) to ERP 6.0 EHP8.
Actually system is running on Oracle 10g (10.2.0.4) and WINDOWS SERVER 2003/X64 64BIT.
Target system will be a SAP ERP 6.0 EHP 8 system running on Windows 2008 R2 with Oracle 12C.
We would like to determine the easiest way (migration path) to do this migration.
We are going first to test this migration on a sandbox system to estimate workload and complexity.
We are thinking to follow the following steps:
- Upgrade Oracle from 10g to 11g à Target system will be R/3 Enterprise running on Win 2003 with Oracle 11g;
- Upgrade SAP from R/3 Enterprise to ERP 6.0 EHP8 à Target system will be ERP 6.0 EHP system running on Win 2003 with Oracle 11g;
- Then migrate the system to new server from Win 2003/Oracle 11g to Win 2008 R2/Oracle 11g;
- Finally upgrade Oracle to 12C.
What do you thing about this approach?
Please share your experiences.
Thank you for your help.
Best regards,
Zobair
↧